Pemanfaatan Mesin Pengaduk Semen/ Concerete Mixer Tenaga Surya dalam Meningkatkan Kualitas Produk Batako dan Paving Block pada UMKM “Utama Bangunan” di Kelurahan Lalolang Kecamatan Tanete Rilau Kabupaten Barru

Mukmin Muhammad, Andi Rachmat, Resky Nur Fadhilah

Abstract


This community service program aims to improve the quality of concrete bricks and paving blocks at the “Utama Bangunan” MSME by utilizing a solar-powered concrete mixer. This innovation was designed to address the limitations of electricity supply and reduce operational costs that previously relied on conventional energy sources. The implementation method included solar panel installation, training on machine operation and maintenance, and production process assistance. The results showed improvements in mixture homogeneity, reduced mixing time, and a 35% decrease in defective products. Additionally, operational costs decreased by an average of 20% per month. The implementation of this technology not only enhanced production quality and quantity but also promoted business sustainability through the use of renewable energy. The program’s success serves as a replicable model for similar MSMEs in rural areas with solar energy potential.

Keywords


Concrete Mixer, Solar Energy, Concrete Brick, Paving Block, MSME.

Full Text:

PDF

References


Aisyahrani, A. (2024). Peran kewirausahaan dalam meningkatkan kesejahteraan masyarakat. BENEFIT: Journal of Business, Economics, and Finance, 2(1), 18–26. https://doi.org/10.37985/benefit.v2i1.341

Aufar, A. (2014). Faktor-faktor yang mempengaruhi penggunaan informasi akuntansi pada UMKM (Survei pada perusahaan rekanan PT. PLN (Persero) di Kota Bandung) (Skripsi tidak dipublikasikan). Universitas Widyatama, Bandung.

Firdaus, A., Tafrilyanto, C. F., & Zayyadi, M. (2025). Peningkatan kualitas produk di era digital melalui pendampingan dan pelatihan pelaku UMKM Desa Kaduara Barat. Jurnal Edukasi Pengabdian Masyarakat: EDUABDIMAS, 4(1), 55–61. https://doi.org/10.36636/eduabdimas.v4i1.6282

Godwin, G., Junaedi, S. R. P., Hardini, M., & Purnama, S. (2024). Inovasi bisnis digital untuk mendorong pertumbuhan UMKM melalui teknologi dan adaptasi digital. ADI Bisnis Digital Interdisiplin (ABDI Jurnal), 5(2), 41–47.

Harman, H., & Padang, E. R. (2022). Perancangan mesin mixer campuran batako dan paving block tipe vertikal untuk usaha kecil dan menengah. Jurnal Ilmiah Sosial Teknik, 4(1), 31–38. https://doi.org/10.59261/jequi.v4i1.67

Heryani, H., Utomo, U., & Zulkarnain, A. F. (2025). Pendampingan implementasi teknologi solar cell pada mitra UMKM di Kota Banjarbaru. Jurnal Pengabdian ILUNG, 4(3), 1–10. https://doi.org/10.20527/ilung.v4i3.14355

Metris, D., Rasyiddin, A., Siahaan, F. S., Aulia, K. R., & Faatihah, A. R. (2025). Inovasi, teknologi dan kepuasan pelanggan: Kunci keberhasilan UMKM di pasar yang kompetitif. Bisman, 8(1), 90–102.

Santoso, G., Hani, S., Rusianto, T., Wahid, R. M., Sidik, K., & Wijaya, D. A. (2024). Penerapan teknologi irigasi berbasis tenaga surya untuk meningkatkan produktivitas pertanian di Dusun Putat, Kapanewon Patuk, Gunungkidul. Jurnal Hilirisasi IPTEKS, 7(3), 359–370.

Widodo, B., Asmoro, W. P., & Setyawan, E. Y. (2021). Aplikasi mesin mixer batako untuk pengadukan adonan semen, pasir, koral, dan pasir untuk meningkatkan kualitas batako. JASTEN: Jurnal Aplikasi Sains Teknologi Nasional, 2(2), 86–91.

Winarni, E., & Mahsun, A. (2021). Faktor-faktor yang mempengaruhi keberhasilan usaha mikro kecil berbasis ekonomi kreatif di Kota Sidoarjo. Yos Soedarso Economics Journal (YEJ), 3(3), 55–61. https://ojs.uniyos.ac.id/index.php/YSEJ




DOI: https://doi.org/10.31004/abdira.v5i4.998

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Mukmin Muhammad, Andi Rachmat, Resky Nur Fadhilah

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.